How To Repair Ryobi Op140 Battery
iv — English
WARNING:
Practise not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Ever wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to exercise so could effect in
objects being thrown into your eyes resulting in possible
serious injury.
APPLICATIONS
You may use this tool for the following purpose:
Charging Ryobi 24 Volt lithium-ion batteries
Caution:
If at any point during the charging process none of the
LEDs are lit, remove the battery pack from the charger
to avoid damaging the product. Exercise NOT insert another
battery. Render the charger and battery to your nearest
service center for service or replacement.
Detect:
Charge in a well-ventilated area. Do not cake charger
vents. Go along them clear to allow proper ventilation.
Assembly
Alarm:
Do not utilize this production if it is not completely assembled
or if whatsoever parts appear to be missing or damaged. Use of
a production that is not properly and completely assembled
could consequence in serious personal injury.
WARNING:
Exercise not attempt to alter this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could consequence
in a hazardous condition leading to possible serious
personal injury.
If whatever parts are damaged or missing, please call 1-800-860-4050 for assistance.
Performance
CHARGING
Run into Effigy 1, page 7.
Bombardment packs are shipped in a low accuse condition to
prevent possible problems. Therefore, you should charge
them before kickoff use. If the charger does non charge the
battery pack nether normal circumstances, return both the
battery pack and charger to your nearest repair center for
electrical cheque.
Make sure the power supply is normal household voltage,
120 volts, Ac merely, 60 Hz.
Connect the charger to a power supply.
Attach the battery pack to the charger by aligning the
raised ribs on the battery pack with the grooves in the
charger, so slide the bombardment pack onto the charger.
Press downward on the battery pack to exist certain contacts on
the battery pack engage properly with contacts in the
charger.
Do not place the charger in an area of extreme heat or
cold. Information technology will work best at normal room temperature.
The bombardment pack will become slightly warm to the
affect while charging. This is normal and does not
indicate a problem.
After charging is complete, the dark-green LED will remain on
while the charger is in Maintenance style.
After completing Maintenance fashion, the green LED
will brainstorm fading on/off continuously. This indicates the
bombardment is fully charged and the charger is in Energy Save
way.
Charger will periodically wake from Energy Save manner to
ensure the battery pack remains in a fully charged state.
To remove the battery pack from the charger, pull up on
the bombardment pack.
How To Repair Ryobi Op140 Battery,
Source: https://www.manualsdir.com/manuals/647471/ryobi-op140.html?page=4
Posted by: kettnerhent1962.blogspot.com
0 Response to "How To Repair Ryobi Op140 Battery"
Post a Comment