To install sliding closet doors is more than but having a user-friendly way to open up and close the cupboard. These nifty doors also save up infinite and don't have the usual creaking and squeaking hinges problems that regular closet doors have.

The sliding closet doors are easy to open up, quiet, and give you lot easy access to the infinite within of the closet. No affair how small your bedroom is, you lot can have a large cupboard that holds all your clothes with doors that don't take upwards one-half the space in the room. With that gained space, you tin can make your bedroom cozy and more than comfortable.

Install Sliding Closet Doors

So how would you go about installing sliding closet doors on your own? First, you need to find the right door types for you.

Sliding Closet Door Options

Sliding closet doors come up in different shapes and styles. That's good news if you accept a specific pattern in listen and you lot wouldn't like the closet door to look out of place or stick out like a sore thumb. But apart from the designs and styles, sliding closet doors either hang by the height and bottom tracks or just the top rails. They each take their advantages.

When you have superlative and bottom tracks, the sliding closet door is more secure and stable. You lot won't accept issues with the door falling off the tracks or giving y'all that jittery slide when y'all open and close it. However, the bottom tracks double the work of installing the door and, in many cases, are just redundant additions.

Many doors come with a top rails and a bottom plastic guide. That gives you the aforementioned stability you'd go from a double-track door while minimizing the installation process. To keep the bottom of the door secure, these doors accept a plastic guide. Eliminating the bottom track means the door is much lighter and easier to maintain.

The Evolving Process of Installing Sliding Cupboard Doors

Equally you might expect from a DIY project that involves wood, there will be a lot of measuring and cutting involved. Even before y'all have purchased the sliding closet doors, you'll need to measure the closet opening to make certain the doors will fit.

The way these doors work is they slide on tracks, unremarkably at the peak. That top track carries the whole weight of the door. Both doors tin slide in either management. That way, you have access to the inside of the closet. However, you tin can simply have admission to ane side of the closet at a time. If yous want to go to the other side, so you'll have to slide both doors in the contrary direction. When you're done, yous slide i door shut.

That ways you lot'll have double tracks at the top of the closet to allow both doors to move freely in either direction. The bottom will also either have double tracks or double guides. In the case of calorie-free doors, you might accept neither tracks nor guides at the bottom of the cupboard to guide the doors.

This is usually a job for two people. You'll need someone to hold the door for you while you guide it onto the track. If you're working alone, this part could be a little tricky.

What Y'all Demand

Tools

Materials
  • Metal hacksaw
  • Tracks
  • Chalk line
  • Sliding doors
  • Measuring record
  • Roller brackets
  • Pencil
  • Screws and nails
  • Drill commuter
  • Floor guides

How to Install Sliding Closet Doors

Closet with Sliding doors

With all the materials and equipment at paw and hopefully someone to assist you, you are ready to start. The first stride is to get the verbal measurements to aid you cull the right door for the bachelor infinite.

1. Mensurate the Space

Start by getting the measurements of the finished opening of the closet. First, measure the top of the cupboard and mark it down. Then get the measurement of the bottom of the closet and write information technology down as well. Do the aforementioned for the pinnacle of the door in two locations, from the floor to the pinnacle edge on the right and again on the left.

Write downwardly the thickness of the frame in 2 locations. That should tell you what type and manner of cupboard door you volition need. Base your conclusion on the smaller measurement, not the higher ane. You'd want the door to fit against the thinnest office of the frame, not stick out.

2. Install the Tracks

The pinnacle track is normally the trickiest role to install. It carries the weight of the door, and if not adjusted well, information technology will either stick out of the wall or sink into the frame. So, measure the superlative opening of the closet and marking the spot on the left and right for the top rails.

With the help of the hacksaw, cutting the guide rails of the track according to the measurements. Place the runway in place at the top and make certain information technology aligns with the closet. You can use wood shims to get the right alignment. When you're satisfied with your work, apply screw nails to secure the track in place. If the walls are besides difficult to screw the nails in, use pilot drills instead.

iii. Install the Flooring Guide

Sliding closet doors without a lesser track normally have a floor guide that you need to install. Only in the example of very low-cal doors that yous would have neither bottom tracks nor floor guides. To install the floor guide, mark the eye of the closet door on the floor and drill a hole into it. Align the floor guide with the edge of the bottom of the closet opening. Employ a screwdriver to spiral the floor guide into identify.

Fit the parts of the flooring guide that become into the doors. Brand sure you lot leave nearly 1-eighth of an inch of infinite to give the doors enough room to slide easily.

4. Secure the Roller Brackets

If the sliding closet doors don't come with pre-installed roller brackets, then you lot'll take to set them yourself. Usually, the doors volition have instructions from the manufacturer near how to install them. Follow these instructions. In general, you'll need to install the roller brackets virtually 2 and a half inches from either end of the door.

For the door closing to the right, fix the roller bracket on the right side. And for the other door that closes to the left, install it at the top of the door to the left. Exam the rollers and brand certain they are not besides tight.

5. Install the Sliding Closet Doors

This part volition require some lifting and adjusting to get it correct. Agree the back door and aim the top at the track. Lean the door at an bending and so that the lesser sticks out of the cupboard. Now slide the roller at the top of the door into the guide runway. If the door has a bottom track, slide the roller into that one, otherwise, slip it into the floor guide. Test the door and make sure information technology moves freely from i end of the closet to the other end.

Exercise the same for the front door. If the doors are heavy to concur, y'all can lift them up and make them residuum on a stool or a depression chair as you lot suit the meridian roller into place.

vi. Make Necessary Adjustments

When you're done with installing the sliding closet doors, survey your piece of work. Check if the doors align with the walls or practise they need to be adapted.

The roller brackets are responsible for the stability and smooth sliding motion of the doors. So inspect them and make sure they're deeply screwed into the doors. If they're a footling loose, this might give you bug downwards the line. The doors become jittery and unwieldy. And then tighten the screws of the brackets with a screwdriver.

7. Install the Handles

Sometimes the handles will come up pre-installed. If non, cheque to see what type of handles they are. Adhesive handles don't need screws. Place them on the designed space on the doors and remove the protective layer then press them against the surface of the door firmly.

If the door handles, need to be screwed in, mark the spots with a pencil and utilize a screwdriver to screw the handles in. Use small screws that are nigh half the thickness of the doors so that yous won't take sharp smash ends sticking out of the inside of the cupboard doors.